|
|
|
Home >
Products
> Entrance doorsets
|
Uses
 Classically styled with distinctive mouldings that create the appearance and feel of traditional entrance doors. Fitted with a mobility threshold as standard, these doorsets are suitable for most new buildings and renovation projects.
Construction
Heavy 57mm thick door sections with solid wide rails and muntins to conservation ovolo or lambs tongue profiles. Panels are exterior grade 45mm thick composite insulated "warm" construction with a ‘u’ value 1.2 w/m2k
featuring raised and fielded profiles both sides.
Operation
Factory hung doorset with key operated multi point locking system.
Glazing
Factory fitted double glazing where appropriate. Alternatively these lights can be left unglazed for customers to fit their own decorative glass panels after installation.
Features
Material:
Hardwood frame, doors constructed in laminated knot free (clear graded) Larch or solid Douglas Fir at our option. Panels are exterior grade composite type.
Profile:
Square frame and ovolo door profiles
Cills:
Extruded aluminium mobility threshold strip mounted on a solid 144mm deep stained Hardwood sub cill
Frame:
68mm thick head and jambs
Operation:
Factory hung to open inwards, right hand hinge viewed from outside. (Not available opening outwards)
Locking System
Multi-point, consisting of upper and lower claw bolts with a central mortice dead bolt and latch all key operated from both sides via double cylinder.
Bolt keepers are high security adjustable boxed version mounted into frame.
Ironmongery
Door hung on brass hinges. Brass key escutcheons and internal lever handle to locking system. Large brass centre
door knobs and traditional knocker (projecting items are removed for delivery)
Weatherseal:
Fitted to frame
Paint:
3 coats white paint
Glass:
Double glazed Low ‘E’ clear toughened safety glass where appropriate
Sizes:
Standard sizes and patterns or made to measure as required (minimum overall frame width to comply with mobility
access is 955mm)
Options available
Profile:
Lambs tongue door profiles
Cills:
Loose mobility threshold for site fitting without Hardwood sub cill
Operation:
Factory hung opposite hand left hand hinge viewed from outside
Ironmongery:
Thumb turn in lieu of internal key operated cylinder
Letter plate and tidy including cut out
Alternative finishes in Polished and Satin Chrome
Paint:
2 coats of white paint for on-site finishing (Translucent stains are not available)
Glass:
Unglazed for customer to supply and fit own decorative glass on site
Fanlight Designs
A range of decorative fanlight grilles are available as shown applied either side of the glass panel. Integral glass spacer bars are not available with these designs.
|
|
|
|
|
|
